Draw the narrowest crop on the working image. Mark the product label, face or other detail that must stay visible. Check how much room the mark has at the edge before exporting the wide card.
Use a 1,600 by 900 source as a worked example. Assume the cards all fill their boxes and keep the image centered. Test a 16:9 banner, a square tile and a 4:5 portrait card. Each taller shape uses the whole height and takes a narrower slice across the source.
| Card shape | Center crop in source pixels | Horizontal range |
|---|---|---|
| 16:9 | 1,600 × 900 | 0 to 1,600 |
| 1:1 | 900 × 900 | 350 to 1,250 |
| 4:5 | 720 × 900 | 440 to 1,160 |
The shared range is 440 through 1,160, before adding a comfort margin. If the vase spans x=490 to x=1,120, its body fits inside all three crops. If its handle reaches x=1,185, the portrait card will cut part of the handle. These coordinates mark crop boundaries measured from the left edge of this example source. A differently proportioned original needs a fresh calculation.
Decide which crop should move
Set the cover image to fill the card without stretching and preview each shape at its actual width. If all details fit with a little room at narrow sizes, one source is enough. If the portrait card only misses an edge, adjust its focal point. Preview both sides after a shift because moving the crop toward the handle reduces the space on the other side.
Make a dedicated crop when a shift still cuts essential details, or when a close-up reads better than the original framing. For example, a wide photo may show a maker beside the vase, while a small tile is intended to show the product. Crop the tile to the vase and keep both assets tied to the same article.
MDN's responsive image guidance calls this art direction. The HTML standard specifies how a picture element can choose different crops through matching source media conditions. Use that pattern where viewport width actually determines the crop. If the same page includes a banner and a portrait tile at once, let each component request the appropriate crop. Use width candidates in srcset for multiple resolutions of the same framing.
Preview the final layout with its real overlay labels or gradients. Leave room for the important edges at the smallest card size. Try a title that wraps to two lines and see whether it covers the label or handle you marked in the original.
Mark the important extent of the subject
On the large working image, draw a box around every feature the smallest card needs. Suppose you are illustrating a ceramic vase and its handle. Mark the handle as well as the main body. Draw vertical lines at both edges of the narrow center crop. The portrait crop in the example has its right edge at x=1,160. A handle extending to x=1,185 is cut by 25 source pixels under that crop. The portion near the boundary may also look cramped once the card has a gradient or corner radius.
Move the portrait crop enough to include the edge and leave a margin. In the vase example, a shift of 45 pixels to the right would move the left edge to 485 and the right edge to 1,205. If the body starts at 490, it now has just five pixels of margin on the left. This is a good reason to review the whole silhouette at the smaller display size. Different source compositions can require moving the camera crop before export to preserve the intended space.
| What the overlay shows | Practical choice |
|---|---|
| Subject clears all edges at the smallest card size | Keep one composition and supply appropriate resolution candidates. |
| A narrow crop misses an accessory on one side | Move the focal point in that component and check the opposite side. |
| A crop can hold the object only by removing an important context detail | Decide which detail the component needs and create a dedicated composition. |
| A title overlaps a key feature | Change the crop, overlay or layout and test with a real long title. |
Test in the component that actually renders the crop
Use a page that includes the real frames, sizes, and title text. The bounding rectangle around the object can survive the mathematically correct crop and still be obscured by a caption or gradient. Load one card with a two-line title to see what happens where the cover has the least free space. Check on a small phone and an intermediate desktop column as well as the widest design proof. A taller resize can make a line of text wrap at a point not represented by the mockup.
An image whose subject is recognisable in all the small shapes can share a single composition. Consider supplying smaller resolutions of that composition so clients need not download the largest file. If a small tile needs a close-up and the banner needs wider context, plan those as different compositions. Check the page actually selects the file you expect. A browser deciding between assets at different widths uses the component's input settings, which the integrator must match to the actual layout. The screenshot format test complements that check with the readable detail and byte cost.
Save the focal point with a reason
For a photo that will reappear on other pages, record which part cannot be lost. Keep a reference showing the narrow crop and any existing custom crop assets. When the product photo is replaced, draw the safe area again for the new source. If proportions change, the former pixel positions are no longer an accurate guide. Retest a representative rounded card or overlay before approving the new files.
Write one note for the next editor describing what each variation shows. Include the article or product the crops belong to. If the square intentionally presents only the vase and the banner shows the maker, make the file names and preview note clear enough to choose the right one. Keep the originals so a future composition can be exported without recropping a small tile.
When the image needs to show a written label, check the original label at the actual fitted scale. Leaving it fully inside the crop does not make it readable. If the associated text already supplies the label, choose the cover framing for recognition at small sizes.


